Rubber License Plate Holder: Top 4 Best Rated Big City Front Bumper Guards

A rubber license plate holder is designed to protect your bumper from accidental scratches that can happen when you’re parking or when someone else carelessly backs into you while parking.  Although a rubber license plate holder does not provide protection against accidents, the right plate-mounted bumper guard will do an excellent job for what it’s designed.

Rubber License Plate Holder: BumpShox XL Car Bumper Protection Mounted ViewA rubber license plate holder or other bumper guard is almost a necessity in big cities like New York City where the real “parking wars” go on every day and night.  Street parking in big cities is an exercise in frustration, futility, and heartburn.  Parking spaces are precious and drivers often squeeze into spaces between cars that would probably be difficult for cars even smaller than their own.

A bumper guard like a rubber license plate holder eliminates many of the dings that happen when two cars come together at the license plate.  Nobody wins because the back of one car ends up with license plate screw dents in their bumper and front of the other car ends up with a mangled license plate or worse.  Rubber bumper guard license plate frames can eliminate most of that damage.

 

Interested in learning about other bumper protection designs?  Be sure to see our other articles about some of the best!

 

Of course, parallel parking can cause damage on the sides of bumpers, too.  A license plate bracket-mounted bumper guard won’t protect against that type of damage, but for what it’s designed, the right model will provide some protection.

What should you look for in a rubber license plate holder?

Size

Most license plate-mounted bumper guards are somewhat wider and taller than a standard license plate frame.  The depth or thickness of a license plate holder made to protect bumpers, on the other hand, is quite a bit more.  Some license plate frames have depths as much as 2 inches or more of thick rubber material that compresses on impact and then returns to its original shape.

Rubber License Plate Holder: Flexy Frame HD Car Bumper Protection Mounted ViewMaterial

You want your rubber license plate holder to be able to absorb shock and then return to its original shape to protect against the next trauma.  Ideally you want the material to be strong, but also flexible, even in freezing winter weather.

You want your bumper guard to be made from material that is not only shock absorbing, but also weatherproof and able to withstand rain, snow, or any other weather that is thrown at it.

Metal license plate brackets are notorious for losing their luster, bending, and corroding away.  A rubber license plate holder will replace your bracket and if made from the right materials will never rust or bend out of shape.

Most rubber holders are made from foam rubber and may experience sun damage.  Ultraviolet light from the sign is not friend of foam rubber or plastic.  Make sure any holder you buy can withstand the unrelenting sun day after day and year after year without compromising its capability.

 

 

 

 

 

Hardware

Every vehicle is different.  Most come with at least some mounting hardware, but some do expect you to use existing license plate mounting screws.  The problem is that plate holder bumper guards are thick and the existing screws may not be long enough.

Also, keep in mind that most manufacturers are expecting you to attach their bumper guard with four screws.  Although most license plates and brackets can accommodate four screws, the way they are attached may only use the top two.  If your license plate and bracket are only attached with the top two screws, you will need to adjust the attachment so that the bumper guard can use all four screw attachments.

Rubber License Plate Holder: BumpTek Plate Pocket Extreme Edition Car Bumper Protection Mounted ViewTop Protection

Often when a taller car backs into your car, they will ride over your license plate bracket and bumper causing possibly significant scratches and other damage.  Some models of rubber license plate holders have a protective rubber extension above the holder that can help prevent at least some of that damage.

Screw Protection

Even when someone else backs into you, you are at risk of liability.  In the absence of video or photographic evidence, an unscrupulous motorist could blame damage to their car on you.  The most common damage is when they impact your car in the front license plate area and the bracket and screws causes scratching, dents, or even holes in their rear bumper.

To protect against this, most rubber bumper guards have screw protection that is an extra layer of protective material around the screw area to keep the screws from impacting and damaging other vehicle bumpers.

Looks

It may not be at the top of your mind, but these bumper guards are thick and will change the appearance of your car’s frontend.  Not every design will complement your vehicle.  Look at the various designs available, and all things being equal, pick one that doesn’t look too horrible.

We searched social media, automotive forums, manufacturer sites, consumer sites, retail sites, and customer review sites to find the most popular and highly rated license plate bracket-mounted bumper guards.

Take a look at our list and see if one of these rubber license plate holders is the best rubber license plate holder for your needs!

Rubber License Plate Holder:  Top 4 Best Rated Big City Front Bumper Guards

#4 – Flexy Frame Heavy Duty Front Bumper Guard

Rubber License Plate Holder: Flexy Frame HD Car Bumper Protection Main ViewThe Flexy Frame Heavy Duty Front Bumper Guard replaces your license plate frame and provides flexible bumper protection against the scratches, dents, and dings caused by careless parkers.  This is the heavy- duty version that is extra thick and wide for extra shock-absorbing protection while remaining stealthy in appearance.  It protects by compressing from both sides when an impact occurs reducing the probability of paint chipping.  Avoid minor insurance claims from low speed rear end collisions. Protect your license plate from damage, helps prevent you from damaging the rear bumpers on automobiles in front of you, and looks good doing it.

 

Rubber License Plate Holder: Features

  • Heavy duty, state-of-the-art, flexible, rubber license plate frame and bumper guard in one that can protect your bumper against scratches, dents, and dings
  • Patented wrap-around design is stealthy and complements the appearance of your vehicle while its flexible rubber frame increases shock absorption
  • Patented screw guard design not only covers your unsightly screws but its integrated screw caps provide your bumper with dual protection against scratches, dents and dings
  • It wraps your license plate inside of it insuring no metal will ever touch your car
  • Heavy duty, state-of-the-art, flexible, rubber license plate frame and bumper guard in one is engineered using a high quality, specially formulated, solid soft rubber core can withstand extreme heat and cold without compromising performance
  • Rubber License Plate Holder: Flexy Frame HD Car Bumper Protection Canted ViewInstalls with two top screws or with four included #12 – 1 inch screws

 

Customer Reviews

See Flexy Frame Heavy Duty Front Bumper Guard Customer Reviews >>>

 

Pros

  • Not as bulky as some
  • Great value
  • Easy installation

 

Cons

  • Needs four mounting screws to mount solidly
  • Screw holes aren’t solid so frame can slip off screws too easily
  • Complaints that the included screws are too long for most applications

 

 

 

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

 

 

 

 

 

 

#3 – BumpTek Plate Pocket Classic Edition

Rubber License Plate Holder: BumpTek Plate Pocket Classic Edition Car Bumper Protection Main ViewBumpTek’s original design, the BumpTek Plate Pocket Classic Edition is lightweight, stylish, and protects against minor parking impacts that might scratch or scuff your bumper.  It features a flexible rubber material that compresses in an impact and then restores to its original shape.  Its lower profile design is not as noticeable on the front of your vehicle as some other designs.  The specially formulated rubber compound is designed to withstand hot and cold climates and will remain flexible and protective even at freezing temperatures.  It has BumpTek’s patent pending Kangaroo pouch system that completely envelopes your license plate in rubber protecting it and other car’s bumpers from damage.  Recessed mounting screws provide additional protection.

 

Features

  • Super durable, soft, low profile rubber license plate holder designed to cushion minor parking bumps
  • Made from a durable and soft rubber compound that compresses and flexes on impact, it can withstand extreme heat and stay flexible in freezing temperatures, and will never crack or rust
  • Lower profile, stealth design complements any vehicle’s style, while not attracting attention
    Lightweight at only 1.65 lbs., it doesn’t put undue stress on mounting brackets
  • Its patent pending Kangaroo pouch system completely encases the license plate in rubber
  • You mount it like any standard license plate frame by simply inserting your license plate its top open slot and bolting it to your vehicle’s front bumper using the included size #14 1-inch screws
  • Rubber License Plate Holder: BumpTek Plate Pocket Classic Edition Car Bumper Protection Mounted ViewMounting screws are recessed into the rubber frame to prevent damage to other vehicles
    Can be mounted with two or four screws

 

Customer Reviews

See BumpTek Plate Pocket Classic Edition Customer Reviews >>>

 

Pros

  • Excellent value
  • Good looks
  • Easy to install
  • Holds license plate securely

 

Cons

  • None noted

 

 

 

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

 

 

 









 

 

 

#2 – BumpTek Extreme Plate Pocket

Rubber License Plate Holder: BumpTek Plate Pocket Extreme Edition Car Bumper Protection Main ViewBumpTek’s biggest, thickest and toughest front bumper guard, the BumpTek Extreme Plate Pocket features solid, flexible rubber construction and a stealthy, low profile appearance that will add sophisticated style and good looks to any vehicle.  This rubber license plate holder compresses and flexes on impact to protect your car from damage and then returns to its original shape.  This system is lower profile and has a stealth design using sharp angles and tapered edges to complement your ride.  Its Kangaroo Pouch System encases your license plate in rubber to protect it and other cars.  Recessed mounting screws provide additional protection.

 

Features

  • Solid, tough, thick, soft, low profile rubber license plate holder designed to provide extra protection to cushion minor parking bumps
  • Made from a tough and flexible rubber compound that compresses, bends, twists, and flexes on impact and then returns to its original shape
  • Its all-weather design can withstand extreme heat and stay flexible in freezing temperatures and it will never crack or rust like metal or plastic frames
  • Lower profile, stealth design uses sharp angles and tapered edges to add sophisticated style to any vehicle
  • Rubber License Plate Holder: BumpTek Plate Pocket Extreme Edition Car Bumper Protection Flexible ViewThick rubber design weights over 2 lbs.
  • Kangaroo pouch system envelopes your license plate to protect it and other cars from damage
  • You mount it like any standard license plate frame by simply inserting your license plate its top open slot and bolting it to your vehicle’s front bumper using the included size #14 1-inch screws
  • Mounting screws are recessed into the rubber frame to prevent damage to other vehicles
    Can be mounted with two or four screws
  • Dimensions are 13W x 7H x 1-3/4-inches thick with 7-inches on center spacing between screw holes

 

Customer Reviews

See BumpTek Extreme Plate Pocket Customer Reviews >>>

 

Pros

  • High quality materials unique plate pocket design
  • Good looking design
  • Does not affect front-end sensors like some models
  • Rubber is tougher than some foam rubber products

 

Cons

  • Heavy and needs four mounting points

 

 

 

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

 

 

 

#1 – BumpShox XL Car Front Bumper Guard

Rubber License Plate Holder: BumpShox XL Car Bumper Protection Main ViewRecently introduced, the BumpShox XL Car Front Bumper Guard features a new military-tough surface texture, blacked out logo for better appearance, and one of the thickest designs on the market. Constructed from a revolutionary, super strong, flexible energy-absorbing material, it will keep flexing bump after bump without rusting, cracking, or bending out of shape.  Its pyramid design with ornate arches and sharp angles, will enhance the look of your front bumper while still providing maximum protection against minor impact parking bumps.  Unique, patented top Flex Fin prevents dents, dings, and scratches in your bumper that occur when a taller vehicle runs over the front license plate.

 

Features

  • Stealthy, thick, rubber license plate holder and front bumper guard in one complements your vehicle while providing protection against low impact parking bumps
  • Super-strong, flexible, energy-absorbing V-Tech foam rubber material absorbs minor parking bumps over and over without rusting, cracking, or losing its shape
  • Heavy-duty design is chemical, UV, and weather resistant to withstand rain, sleet, or shine 24 hours a day while staying flexible even in freezing temperatures
  • Patented Flex Fin is designed to protect against dings, dents, and scratches from taller vehicles riding up and over your license plate
  • Recessed screws prevent damage to other vehicles while parking
  • BumpShox flexes and molds around any shape bumper for a perfect fit
  • New military-tough surface texture delivers extra protection for the frame
  • Rubber License Plate Holder: BumpShox XL Car Bumper Protection Mounted ViewA blacked-out logo delivers a stealthier appearance and its ornate arches and sharp angles enhances the sculpted lines of your vehicle
  • Noticeably bigger and thicker than a standard license plate frame, it measures 14W x 7.5H x 2.25D inches
  • Installs easily using four included #14 ¾-inch screws

 

Customer Reviews

See BumpShox XL Car Front Bumper Guard Customer Reviews >>>

 

Pros

  • Durable, tough protection
  • Quality materials and construction
  • Easy to install
  • Good looking design

 

Cons

  • Can interfere with parking sensors
  • Included screws not long enough for some applications
  • Needs bracket that can secure the bumper guard with four screws

 

 

 

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

 

 

 

 

 

 

Rubber License Plate Holder

 

 

 

 

Liked this post? Subscribe to my RSS feed and get loads more!

What do you think of these bumper guards? Which license plate holder are you planning to buy? Please take a moment to leave a comment below.

Please share if you think others will benefit!

A front bumper guard is designed to protect your car’s front bumper in the event you accidentally touch the car in front of you during parking or someone else inadvertently backs into you.  This is a constant problem in cities like New York City where parking is at a premium and cars park closer to each other on the street than just about anywhere else in the USA.  We sincerely hope that this article has provided you with valuable information that helps you choose the best rubber license plate holder for your needs!





Web Hosting






Leave A Reply

Your email address will not be published. Required fields are marked *